Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.

Hammer Crusher Operating Principle:

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Type

Specifications

Feeding
size(mm)

Discharging
size(mm)

Capacity
(m³/h)

Motor

Total
weight
(t)

Dimensions
(L*W*H)(mm)

Number of poles

Power
(kw)

Hammer
crusher

PC400*300

<=200

<=25

5-10

4

11

0.8

900*670*860

PC600*400

<=250

<=30

10-22

4

22

2.26

1200*1050*1200

PC800*600

<=250

<=35

18-40

4

55

4.8

1310*1180*1310

PC1000*800

<=350

<=35

25-50

4

75

5.9

1600*1390*1575

PC1000*1000

<=350

<=35

30-55

6

132

8

1800*1590*1775

PC1250*1250

<=350

<=35

35-65

6

180

14

2060*1600*1890

PC1400*1400

<=350

<=35

50-100

6

280

32

2365*1870*2220

PC1600*1600

<=350

<=35

100-150

8

480

37.5

3050*2850*2800